Rinsing after cleaning:
Clean your lenses with a daily cleaner as instructed by your eye care practitioner.
After cleaning , thoroughly rinse lenses with Bausch+Lomb Splash by holding the lenses between the index finger and the thumb or placing it in the palm of the hand.
Direct a steady stream of Bausch+Lomb Splash onto the lenses.
Heat (thermal) Disinfection:
Use fresh Bausch+Lomb Splash when heat disinfecting. Follow the directions provided with your disinfecting unit.
Chemical Disinfection (Including hydrogen peroxide systems, such as Bausch+Lomb EasySept):
Following disinfection, rinse lenses thoroughly with Bausch+Lomb Splash before insertion.
Use Bausch+Lomb Splash to dissolve enzymatic cleaning tablets.
Follow directions provided with the enzymatic cleaner.
Boric Acid, Sodium Borate, Potassium Chloride, Sodium Chloride.
Preservatives: Polyaminopropyl Biguanide (0.00003%) and Edetate Disodium (0.025%).
Always clean, rinse and disinfect lenses each time you remove them from your eyes.
Never re-use the Bausch+Lomb Splash. Fresh Bausch+Lomb Splash must be used daily.
Keep the bottle tightly closed when not in use. Saline is NEVER to be used for contact lens disinfection.
After placing the lenses on your eyes, empty your lens storage case, and rinse with Bausch+Lomb Splash.
To avoid contamination, do not touch the opening of the bottle to any surface. Failure to follow these procedures may result in the development of serious eye infections.
If irritation occurs, persists or increases, discontinue use and consult your eye care practitioner immediately. Discard after 28 days of opening.
- Do not use beyond expiry date.
- Keep out of reach of children.