Duofilm Skin Tag Treatment 50ml

Description

Duofilm Skin Tag Treatment

Directions

Apply the disposable foam discs with the adhesive side to the skin with the hole directly over the skin tag.
Apply the actuator on the aerosol can, with the metal tip facing up and align the markings. Do not push down on the actuator until ready to cool.
Place the aerosol can on a hard surface and push down on the white actuator for 5 seconds. Then allow the can to rest for 5 seconds. Be careful to avoid contact with the metal tip when pressing down. (Do not press for longer than directed and wait at least 5 minutes before reactivating.)
Remove the actuator from the aerosol can, with the metal tip facing up.
Apply the metal tip on the skin tag for 40 seconds. Make sure the metal tip covers as much of the skin tag as possible. After application remove the foam disc and dispose of it. Do not re-use.
Wash hands immediately after use.
When used by more than one person and/or after each application, clean the actuator with alcohol on a small piece of cloth.

Ingredients

50ml (at date of manufacture) of the compressed liquid gas Dimethyl ether (DME)

Warnings

For external use only.
Keep out of reach and sight of children.
Do not use on children under the age of 18 years.
Pressurised container: may burst if heated.
Do not pierce or burn, even after use.
Keep away from heat/sparks/open flames/ hot surfaces
No smoking. Do not spray on an open flame or other ignition source.
Do not expose to temperatures exceeding SD”C.
Protect from sunlight. Store between 10°C and 25°C.