Description
Directions
- It can take up to 30 minutes until the heat patch warms up to an effective heat level.
- The pouch should only be opened directly before use.
- The patch should only be applied on clean, dry and unbroken skin.
- Open the pouch and remove the sealing paper from the back of the patch.
- Place adhesive side of Spiral Heat to the skin directly over the painful area and press on firmly.
- After use slowly peel off from the skin.
- The patch should not be worn for more than 12 hours within any 24 hour period.
Warnings
As with any heat product. the patch has the potential to cause skin irritation or bums. Therefore, it is recommended to avoid circumstances that may increase the heat effect e.g. tight clothing or additional pressure. Moreover, you should periodically check the skin reactions.
End usage of product immediately if you feel any skin irritations or burns or if the product feels too hot.
The risk of burning increases as you age. If you are 55 years of age or older, wear the patch over a layer of thin clothing.
Do not wear patch while sleeping.
To avoid the risk of burning allow air to circulate over the heat patch and avoid extra pressure such as lying or sitting on the heat patch, wearing under tight clothing or a belt and leaning against hard surfaces.
Do not overlap heat cells when applying to joints.
The heat spirals contain iron powder.
Do not cut the product.
Do not try to reheat or put into a microwave.
Remove the product before undergoing a MRI (magnetic resonance imaging) procedure.
Keep away from children and pets.
For external use only.
Only for single use — for each application use a new patch to retain described heat effect.
Read carefully before opening.
Keep the instructions as long as you are using the product.
Please read all instructions carefully before use.
Reviews
There are no reviews yet.