Welcare Ear Thermometer

Description

Welcare Ear Thermometer

Directions

Please read the full Instructions for Use provided with the product prior to using.

1. Ensure a clean probe cover is attached to the probe
2. Turn the product on
3. Insert the probe into the ear canal
4. Press the test button once to start measurement
5. 1 “beep” will sound for approximately 1 second and the temperature will be displayed on the LCD screen

Cleaning and Maintenance

If device is accidentally used without a probe cover, clean the probe as follows:
– Use a cotton swab with the Alcohol (70% concentration) to clean the lens (on the inside of the probe).

• To safely clean the probe window, gently wipe its surface with a cotton swab slightly moistened with isopropyl alcohol and immediately wipe dry with a clean cotton swab.
• After cleaning, allow at least 5 minutes drying time before taking temperatures.
• Use a soft, dry cloth to clean the thermometer display and exterior.
• Do not submerge the thermometer in water.
• Periodic cleaning and disinfection of the device following use to prevent patient cross infection.
• Use a soft cloth slightly moistened with a 75% isopropyl alcohol solution to disinfect the thermometer and probe.
• Do not use abrasive cleaners.
• The probe is the most delicate part of the thermometer. Use with care when cleaning the lens to avoid damage.

Note: Do not use any chemical other than isopropyl alcohol to clean the probe window.

Safety Warnings

• It is recommended to use this unit with a Welcare Ear Thermometer Probe Cover for hygiene purposes.
• DO NOT forcibly insert the probe into the ear.
• If you feel any discomfort such as a pain during the measurement, stop using the product immediately.
• DO NOT use this product if suffering from an ear disease such as otitis externa or otitis media. It may worsen the condition.
• DO NOT use this product when the external auditory canal is wet, such as after swimming or taking a bath. It may injure the external auditory canal.
• Conducting self-diagnosis based on the measurement results and/or treatment can be dangerous. Please follow the instructions of your doctor.
• If the ear is cold, wait until the ear is warmed up before taking a temperature measurement.
• To avoid inaccurate readings, always attach a new, clean probe cover for each temperature reading. Correct measurement result may not be obtained if dirty probe covers are used.
• DO NOT use a probe cover after someone else has used it. This can lead to cross infection.
• For persons wearing hearing aids or earplugs, remove the device and wait 20 minutes prior to taking a temperature.

Warnings

• Proper installation of the probe cover ensures accurate measurements.
• If device is accidentally used without a probe cover, clean the probe as per cleaning instructions.
• The probe window must be kept clean, dry, and undamaged to ensure accurate readings.
• DO NOT attempt measurements when the thermometer is wet, as inaccurate readings may result.
• If there is any temperature difference between the places where the unit is stored and where you are going to take the measurement, leave the unit in the room where the unit is going to be used for more than thirty minutes to allow it to reach room temperature before the first measurement.
• DO NOT touch the infrared sensor with a finger or breathe on it. The probe is the most delicate part of the thermometer. Use with care when cleaning the lens to avoid damage.
• DO NOT attempt to open or disassemble the product.
• DO NOT let children play with the product – it is not a toy.
• Contains small parts that may cause a choking hazard. Keep children away from packaging, product, and its components.
• In an emergency case, if a child swallows a battery or a probe cover, immediately consult with a doctor.
• DO NOT throw batteries into a fire. The battery may explode.
• Remove battery from the device when not in operation for a long time to prolong the battery life.
• DO NOT put the thermometer in direct sunlight or expose to extreme temperatures.
• During a measurement, ensure that no mobile phone or any other electrical devices that emit electromagnetic field is within 30cm of this device. This may result in incorrect operation of the device and/or cause an inaccurate reading.

Storage

• Place the thermometer back into the original packaging after use.
• Store the thermometer and probe covers in a dry location, free from dust and contamination and away from direct sunlight.