Welcare Stay-Dry Wireless Bedwetting Alarm WBA200

Description

Welcare Stay-Dry Wireless Bedwetting Alarm WBA200

Usage Instructions

1. Power On/Off switch:
– Slide the switch to the Right to turn ON the receiver,
– Slide the switch to the Left to turn OFF the receiver.

2. Select the mode you wish to use:
• Vibration Mode: – Icons light up sequentially, then locks on vibration mode automatically symbol will appear. – Press the OK button to confirm.
• Sound Mode: – Press the SET button 3 times the screen – Press the OK button to confirm. symbol will appear.
• Vibration + Sound Mode: – Press the SET button 4 times, the screen symbols will appear.– Press the OK button to confirm.

3. Urine Detection Sensor & Transmitter:
• Open and attach the Urine Detection Sensor & Transmitter Back Clip to the front of the underwear or pyjamas, positioning it where urine is most likely detected.
Alarm Response:
• When the first sign of moisture is detected, the symbol appears on the screen along with the sound and/or vibration symbol/s depending on the alarm mode set.
• The alarm will sound and/or vibrate to wake the child.
• Press any button to cancel the alarm.
• The alarm symbol will disappear and return to normal mode.
• After the alarm has sounded and/or vibrated and the child wakes up (they may need assistance):
– Unclip the Urine Detection Sensor & Transmitter from the child’s underwear/pyjamas.
– The child should then go to the toilet and finish emptying their bladder.
• Immediately clean and dry the Urine Detection Sensor & Transmitter (to avoid corrosion)
• Re-attach the Urine Detection Sensor & Transmitter using the Back Clip to the child’s clean dry underwear or pyjamas.

Ingredients

Packaging Contents: 1x Bedwetting Alarm Receiver , 1x Urine Detection Sensor & Transmitter, 1x Charging/Storage Case, 1x USB Charging Cable, 1x Progress Chart with Reward Stickers, 1x Instruction Manual & Warranty Information.

Storage & Disposal Instructions

Clean the product as per above cleaning instructions.
Place the Urine Detection Sensor & Transmitter and Receiver into the Charging/Storage Case.
Store in a cool, dry place away from direct sunlight.

Warnings

Read this section thoroughly before using the product.
Please ensure you observe the safety instructions to avoid accidents, injury, and damage.
Intended Purpose The Welcare Stay-Dry Wireless Bedwetting Alarm is designed to train a child out of bedwetting.
DO NOT use for purposes other than bedwetting.
This product is not a therapeutic device.
Do not use as a substitute for medical device.

Limitations
• DO NOT use this product for anything other than its intended purpose and only use as described in this manual.
• The Welcare Wireless Bedwetting Alarm is a non-professional appliance designed for private use.
Contraindications Improper use may result in electrical interference, electric shock, burns, serious injury or death.
The following are conditions for which the product must not be used.
This product must not be used in combination with the following devices:
1) Active/electronic implanted medical devices (e.g. pacemaker)
2) Life-support systems (e.g. ventilator)
3) Implanted metallic devices (e.g. hip replacement)
4) Electronic medical devices attached to the body (e.g. ECG machine)