LifeSmart Universal Lancing Device LS-815

LifeSmart Universal Lancing Device LS-815

Directions

1. Remove the cap of the lancing device.
2. Insert a lancet into the lancet holder and push down firmly until it is fully secured.
3. Twist the protective disk off the lancet.
4. Replace and twist the cap until tight.
5. Hold your finger on the cap of depth number NOT the body Select the desired depth of penetration by turning the adjustable tip as show in the picture.
   Adjustment:
   • 1 – 3 soft or dedicated skin
   • 4 – 6 normal skin
   • 7 – 9 thick or callused skin
6. Pull the cocking control back until it clicks. You will see a color change inside the release button when it is ready.
7. Lancing the finger. Press the lancing device’s tip firmly against the lower side of your fingertip. Press the release button to prick you finger, then a click indicates that the puncture is complete.
8. Remove the device from the puncture site. After penetration, remove the first drop of blood with a clean cotton swab. Gently squeeze the punctured area to obtain another drop of blood. Be careful NOT to smear the blood sample. Apply the blood to the test strip.
9. Remove the lancet by pulling the cap off first. Safely dispose of the used lancet by placing the protective disk on a hard surface, and pushing the exposed tip into the disk.
10. Slide the ejector forward to remove the used lancet. Dispose of the lancet according to your local regulations.