Description
LifeSmart Universal Lancing Device LS-815
Directions
- Remove the cap of the lancing device.
- Insert a lancet into the lancet holder and push down firmly until it is fully secured.
- Twist the protective disk off the lancet.
- Replace and twist the cap until tight.
- Hold your finger on the cap of depth number NOT the body Select the desired depth of penetration by turning the adjustable tip as show in the picture.
Adjustment:- 1 – 3 soft or dedicated skin
- 4 – 6 normal skin
- 7 – 9 thick or callused skin
- Pull the cocking control back until it clicks. You will see a color change inside the release button when it is ready.
- Lancing the finger. Press the lancing device’s tip firmly against the lower side of your fingertip. Press the release button to prick you finger, then a click indicates that the puncture is complete.
- Remove the device from the puncture site. After penetration, remove the first drop of blood with a clean cotton swab. Gently squeeze the punctured area to obtain another drop of blood. Be careful NOT to smear the blood sample. Apply the blood to the test strip.
- Remove the lancet by pulling the cap off first. Safely dispose of the used lancet by placing the protective disk on a hard surface, and pushing the exposed tip into the disk.
- Slide the ejector forward to remove the used lancet. Dispose of the lancet according to your local regulations.
Easy to use